CVE-2018-14988

The MXQ TV Box 4.4.2 Android device with a build fingerprint of MBX/m201_N/m201_N:4.4.2/KOT49H/20160106:user/test-keys contains the Android framework with a package name of android (versionCode=19, versionName=4.4.2-20170213) that contains an exported broadcast receiver application component that, when called, will make the device inoperable. The vulnerable component named com.android.server.SystemRestoreReceiver will write a value of –restore_systemn–locale=<localeto the /cache/recovery/command file and boot into recovery mode. During this process, it appears that when booting into recovery mode, the system partition gets formatted or modified and will be unable to boot properly thereafter. After the device wouldn’t boot properly, a factory reset of the device in recovery mode does not regain properly functionality of the device. The com.android.server.SystemRestoreReceiver broadcast receiver app component is accessible to any app co-located on the device and does not require any permission to access. The user can most likely recover the device by flashing clean firmware images placed on an SD card.

Source: CVE-2018-14988

CVE-2018-14995

The ZTE Blade Vantage Android device with a build fingerprint of ZTE/Z839/sweet:7.1.1/NMF26V/20180120.095344:user/release-keys, the ZTE Blade Spark Android device with a build fingerprint of ZTE/Z971/peony:7.1.1/NMF26V/20171129.143111:user/release-keys, the ZTE ZMAX Pro Android device with a build fingerprint of ZTE/P895T20/urd:6.0.1/MMB29M/20170418.114928:user/release-keys, and the ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contain a pre-installed platform app with a package name of com.android.modem.service (versionCode=25, versionName=7.1.1; versionCode=23, versionName=6.0.1) that exports an interface to any app on co-located on the device. Using the exported interface of the com.android.modem.service app, any app can enable and obtain certain log files (modem and logcat) without the appropriate corresponding access permissions. The modem logs contain the phone number and full text body of incoming and outgoing text messages in binary format. In addition, the modem log contains the phone numbers for both incoming and outgoing phone calls. The system-wide logcat logs (those obtained via the logcat binary) tend to contain sensitive user data. Third-party apps are prevented from directly reading the system-wide logcat logs. The capability to read from the system-wide logcat logs is only available to pre-installed system apps and platform apps. The modem log and/or logcat log, once activated, get written to external storage (SD card). An app aware of this vulnerability can enable the logs, parse them for relevant data, and exfiltrate them from the device. The modem log and logcat log are inactive by default, but a third-party app with no permissions can activate them, although the app will need to be granted the READ_EXTERNAL_STORAGE permission to access them.

Source: CVE-2018-14995

CVE-2018-15005

The ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contains a pre-installed platform app with a package name of com.zte.zdm.sdm (versionCode=31, versionName=V5.0.3) that contains an exported broadcast receiver app component named com.zte.zdm.VdmcBroadcastReceiver that allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.

Source: CVE-2018-15005

CVE-2018-14998

The Leagoo P1 Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a hidden root privilege escalation capability to achieve command execution as the root user. They have made modifications that allow a user with physical access to the device to obtain a root shell via ADB by modifying read-only system properties at runtime. Specifically, modifying the ro.debuggable and the ro.secure system properties to a certain value and then restarting the ADB daemon allows for a root shell to be obtained via ADB.

Source: CVE-2018-14998

CVE-2018-14987

The MXQ TV Box 4.4.2 Android device with a build fingerprint of MBX/m201_N/m201_N:4.4.2/KOT49H/20160106:user/test-keys contains the Android framework with a package name of android (versionCode=19, versionName=4.4.2-20170213) that dynamically registers a broadcast receiver app component named com.android.server.MasterClearReceiver instead of statically registering it in the AndroidManifest.xml file of the core Android package, as done in Android Open Source Project (AOSP) code for Android 4.4.2. The dynamic-registration of the MasterClearReceiver broadcast receiver app component is not protected with the android.permission.MASTER_CLEAR permission during registration, so any app co-located on the device, even those without any permissions, can programmatically initiate a factory reset of the device. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of core Android process.

Source: CVE-2018-14987

CVE-2018-15006

The ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contains a pre-installed platform app with a package name of com.android.zte.hiddenmenu (versionCode=23, versionName=6.0.1) that contains an exported broadcast receiver app component named com.android.zte.hiddenmenu.CommandReceiver that is accessible to any app co-located on the device. This app component, when it receives a broadcast intent with a certain action string, will write a non-standard (i.e., not defined in Android Open Source Project (AOSP) code) command to the /cache/recovery/command file to be executed in recovery mode. Once the device boots into recovery mode, it will crash, boot into recovery mode, and crash again. This crash loop will keep repeating, which makes the device unusable. There is no way to boot into an alternate mode once the crash loop starts.

Source: CVE-2018-15006

CVE-2018-14986

The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed app with a package name of com.android.messaging (versionCode=1000110, versionName=1.0.001, (android.20170630.092853-0)) containing an exported content provider named com.android.messaging.datamodel.MessagingContentProvider. Any app co-located on the device can read the most recent text message from each conversation. That is, for each phone number where the user has either sent or received a text message from, a zero-permission third-party app can obtain the body of the text message, phone number, name of the contact (if it exists), and a timestamp for the most recent text message of each conversation. As the querying of the vulnerable content provider app component can be performed silently in the background, a malicious app can continuously monitor the content provider to see if the current message in each conversation has changed to obtain new text messages.

Source: CVE-2018-14986

CVE-2018-20579

Contiki-NG before 4.2 has a stack-based buffer overflow in the push function in os/lib/json/jsonparse.c that allows an out-of-bounds write of an ‘{‘ or ‘[‘ character.

Source: CVE-2018-20579

CVE-2018-20578

An issue was discovered in NuttX before 7.27. The function netlib_parsehttpurl() in apps/netutils/netlib/netlib_parsehttpurl.c mishandles URLs longer than hostlen bytes (in the webclient, this is set by default to 40), leading to an Infinite Loop. The attack vector is the Location header of an HTTP 3xx response.

Source: CVE-2018-20578

CVE-2018-16632

Mezzanine CMS v4.3.1 allows XSS via the /admin/blog/blogcategory/add/?_to_field=id&_popup=1 title parameter at admin/blog/blogpost/add/.

Source: CVE-2018-16632